|
| |
Flex-All
|
 |
Flex-All is a plasticizer for lacquer, primer, and butyrate dope. In lacquer, it
completely eliminates cracking and spiderwebbing. Also it aids in the gloss
retention of the paint. When used with dope, it helps reduce shrinking. One
bottle is enough for use on several airplanes.
Micro
Balloons
|
 |
Micro-Balloons are inert material that can be mixed with epoxy or polyester
resins and used to fill dents and dings, make fillets, or mold parts.
We recommend using a 30 minute epoxy as it is stronger and less brittle than
faster curing resins and gives greater mixing versatility. When completely
cured, sand with 180 grit to rough the shape and finish with 220 grit.
Southern's
Sorghum
|
 |
Southern's Sorghum is still the best contact adhesive available for sheeting
foam cores.
It is simple to use. Just brush a thin coating of Sorghum on both the foam core
and the wing sheeting, let both parts completely dry then press the foam and the
sheeting together in position and it is bonded. The seven ounce bottle is enough
for an average wing and stab.
| SGHM-5050 |
SOUTHERN'S SORGHUM |
C/Applicators
|
 |
The C/Applicator allows you to put thinner, solvents, paint, and C/A glue
exactly where you want. It features a long, flexible shaft for hard to reach
areas. It is the thin, squeezable alternative to bulky bottles.
| CAAP-8100 |
C/APPLICATOR (12/pkg.) |
Carbon
Fiber Tape
|
 |
Carbon Fiber Tape is a space age material could more than double the life of
your model. It is among the strongest materials known to man. By epoxying the
tape in those crucial areas (such as on foam wings, around cut-outs in wings,
and along fuselage sides), it can lengthen the life of any model.
| CFTP-5220 |
CARBON FIBER TAPE (12 ft. x 3/4 in.) |
Carbon
Fiber Strip
|
 |
Carbon Fiber Strip has the same strength as our Carbon Fiber Tape, but comes in
a "ribbon-like" strip. Use it to strengthen foam wings, fuse sides,
retract cut-outs or any weak areas in your model.
It can be formed into right angles by applying heat - great for those hard to
reach areas!
| CFSP-5230 |
CARBON FIBER STRIP (5 1/2 ft. x 1/2 in.) |
Installation of Carbon Fibre
on a foam wing. |
Installation of Carbon Fibre
in a built-up wing. |
Lite Flite wheels are the best, maintenance free wheels you can buy for your
model. The advantage our wheels have over other brands is their light weight;
just 3/4 ounce for a pair of 2 1/4 in. wheels.
|
The tires are made from thick, durable foam mounted on sturdy hubs.
The injection molded snap-together hubs securely lock the rubber to
prevent run-away tires. The plastic hubs are also very durable and have
no threads to jam on your axle.
All wheels are available in either a squared-off profile for maximum
surface area, or our popular treaded surface for added realism.
|
 |
|
Lectra Lite Wheels
Designed for electrics and smaller models where weight is a premium.
These are made from thinner 1/2 in. material. Hubs fit 1/8 in. axles but
may be drilled out to fit 3/16 in. axles maximum.
|
|
Lite Flite Wheels
Sizes available for most trainer, sport, scale, or pattern models. A
better alternative to the wheels that are included with most kits. Hubs
fit 1/8 in. axles but may be drilled out to fit 3/16 in. axles maximum.
|
|
Big Flite Wheels
Perfect for large models where extra weight is not welcomed. These
wheels are designed to take the abuse which comes with larger, heavier
models. Hubs fit 5/32 in. axles but may be drilled out to fit 5/16 in.
axles maximum.
|
For
a chart of wheel sizes, dimenstions and order numbers, click here
|
