|
IFO MK 3
Gym / Yard / Park flyer!
Tired of the usual rudder-elevator R/C controlled electric
park-flyers?
Are you ready to graduate to the next flying skill level? OR have
you flown gas models all your life and would like to try a
front-yard high-performance electric model? The IFO is the
perfect model for you! The IFO is highly aerobatic designed for
rolls, inside/outside loops, inverted flight and the unique
IFO "falling leaf" maneuver.
Not only is the IFO designed for slow-fly extreme aerobatics but the
IFO's all carbon airframe makes it ideal for combat and indoor pylon
racing! AND not only that, the IFO can be built and flown in the
same day!
|

Preparing for vertical takeoff.
|

Close up hovering flight!
|
Design
Features:
-
Carbon rod propeller guard
-
Simple mono wheel landing gear
-
Extremy simple hinges
-
All carbon airframe for durability
-
Does NOT require expensive motor and
propeller
-
Detachable tail and foldable landing gear
for travel convenience
I.F.O. Mark 3 Performance:
- 3 ft. diameter Outside & Inside Loops
- 360 deg. per second Rolls
- Hovering with 10 cell pack
- Sustained Inverted Flight
- 25 to 5 mph speed range
- 8 ft. take off roll into half inside loop
- Picnic table top landings
|
Specifications:
- Wing Span: 33.5"
- Flight Weight starting from: 6.7 oz.
- Wing Loading: 1.65 oz./sq. ft.
- Wing Area: 589 sq. in.
- 3 channel (elevon & throttle)
- Step by Step Instruction
- Full size Plans
- Carbon Rods
- Kevlar Thread
- Wheel
- Clear AND Red plastic wing covering
|
|
Required
to Complete:
- Jamara Pro 280 motor with 4:1 gear box +
recommended propeller
- Jamara Micro 2G motor speed controller or similar
- Two Jamara Bit micro servos with 11 oz.-in torque
or Hitec HS-55
- Light weight receiver: Hitec555 or Alpex
Micro 4 or similar
- Nicad Batteries: 7 cell, 8.4V, 150 mah Nicad
pack or 8 cell, 9.6V, 110 mah Nicad packs: 2 to 4 minutes endurance.
- NiCad Rapid Charger: CG-320 Hitec or similar
- Lithium Batteries: For 20 -30 minutes
endurance, the Duralite 9 volt 800 mah battery pack
- Hot Stuff or Zap & 3M77 spray adhesive
|