Power Packs:

High Discharge Lithium Polymer 7.4V 340mAh JST

Click on image for larger
or alternate view.
  Capacity:     340mAh    
  Voltage:     7.4V    
  Dimensions:     1.86 x 1.19 x 0.21 in. / 53 x 34 x 6 mm    
  Weight:     0.78 oz. / 22.1 grams    
  Connector Type     Red 2-Pin JST Male    
Performance Data:
  • Charge Characteristics (Data For One Cell)
  • Discharge Characteristics (Data For One Cell)
  • Cycle Life Characteristics (Data For One Cell)
  • Safety Report
    Manufacturer suggested quick charge rate is 1C for one hour. You can use 2C, but it will shorten the life of your battery.
    Warning: A Lithium Polymer battery requires a charger that supports Lithium Polymer batteries. Balsa Products assumes no responsibility for batteries damaged as a result of exceeding the current limitations as specified for charging and discharging this battery.
     
    		•
    Price: $27.99
    High Discharge Lithium Polymer 7.4V 600mAh JST

    Click on image for larger
    or alternate view.
      Capacity:     600mAh    
      Voltage:     7.4    
      Dimensions:     2.05 x 1.12 x .28 in. / 52 x 32 x 8 mm    
      Weight:     1.09 oz. / 31 grams    
      Connector Type     Red 2-Pin JST Male    
    Performance Data:
  • Charge Characteristics (Data For One Cell)
  • Discharge Characteristics (Data For One Cell)
  • Cycle Life Characteristics (Data For One Cell)
  • Safety Report
    Manufacturer suggested quick charge rate is 1C for one hour. You can use 2C, but it will shorten the life of your battery.
    Warning: A Lithium Polymer battery requires a charger that supports Lithium Polymer batteries. Balsa Products assumes no responsibility for batteries damaged as a result of exceeding the current limitations as specified for charging and discharging this battery.
     
    		•
    Price: $20.95
    High Discharge Lithium Polymer 7.4V 1200mAh JST

    Click on image for larger
    or alternate view.
      Capacity:     1200mAh    
      Voltage:     7.4    
      Dimensions:     2.01 x 1.42 x 0.39 in. / 51 x 36 x 11 mm    
      Weight:     1.76 oz. / 32.0 grams    
      Connector Type     Red 2-Pin JST Male    
    Performance Data:
  • Charge Characteristics (Data For One Cell)
  • Discharge Characteristics (Data For One Cell)
  • Cycle Life Characteristics (Data For One Cell)
  • Safety Report
    Manufacturer suggested quick charge rate is 1C for one hour. You can use 2C, but it will shorten the life of your battery.
    Warning: A Lithium Polymer battery requires a charger that supports Lithium Polymer batteries. Balsa Products assumes no responsibility for batteries damaged as a result of exceeding the current limitations as specified for charging and discharging this battery.
     
    		•
    Price: $30.95
    Ni-MH 8.4V - 350mAh JST

    Click on image for larger
    or alternate view.
      Type:     Ni-MH 2/3 AAA    
      Voltage:     8.4V    
      Weight:     1.98 oz. / 56.1 grams    
      Typical Capacity (mAh):     370    
      Minimum Capacity (mAh):     350    
      Standard Charge Current (mA):     70    
      Standard Charge Duration (h)     7    
      Fast Charge Current (mA):     350    
      Fast Charge Duration (h):     1.2    
      Length:     2.84" / 72 mm    
      Width:     1.06" / 27mm    
      Height:     0.39" / 10mm    
    Price: $

     

    NiMH 8.4V - 280mAh Teig
      Type:     NiMH  
      Voltage:     8.4V  
      Weight:     2.05 oz (58.3 grams)  
      Capacity:     280 mAh  
    Extra long life Nickel Metal Hydride batteries for indoor or park flyer electrics. Basically the same size as and weight of our 110mAh NICAD batteries but with 280mAh capacity. This battery does not come with any connector. In most common applications you will need a 2-Pin Male JST Connector. This item is commonly used for a park flyer power system. Heat sink recommended on motor.
    Price: $18.00 
    NiMH 9.6V - 280mAh Teig
      Type:     NiMH  
      Voltage:     9.6V  
      Weight:     2.33 oz (66.2 grams)  
      Capacity:     280 mAh  
    Extra long life Nickel Metal Hydride batteries for indoor or park flyer electrics. Basically the same size as and weight of our 110mAh NICAD batteries but with 280mAh capacity. This battery does not come with any connector. In most common applications you will need a 2-Pin Male JST Connector. This item is commonly used for a park flyer power system. Heat sink recommended on motor.
    Price: $20.00

     

     

     

    HELMET.gif (5106 bytes)

     

    Send mail to admin@eam.net with questions or comments about this web site.
    Copyright © 1999 EAM/ Electric Aero Modeling USA