| Suitable for motors
and driving units of the range: |
SPEED 400,
2×SPEED 400, SPEED 480 etc. |
| Number of NiCd / NiMh feeding cells: |
6 to 12 |
| Max. continuous
current: |
18 A |
| Max. current for 5 sec: |
23 A |
| Recommended load
(electric motor with the drain): |
3 to 18 A |
| Switching freq. of the motor (PWM) : |
2 kHz |
| On-state switch
resistance at 25 °C : |
0,005 Ohm |
| Max. current of BEC 5,0 V circuit :
|
2 A peak (power dissipation
1,5 W) |
| JR servokonektor
zlacenı, servokabel: |
0,14 mm2 |
| Dimensions: |
29 × 24 × 6,5 mm |
| Weight without cables
: |
8 g |
| Total weight with all cables: |
15 g |
| Power cables of
length 90 mm : |
1,5 mm2 |
| Current fuse of the controller: |
yes |
| Automatic current
fuse of the motor (ACF): |
yes |
| Automatic current reduce: |
yes |
| Intelligent power
reduce for empty accus (IPR): |
yes |
| Thermal fuse of the controller: |
yes |
| Thermal fuse of the
motor: |
no |
| Programming parameters permanent
memory: |
no |
| U_END signal:
|
no |
| Automatically programmed parameters (APS): |
parameters of control signal, min and max
position of the throttle stick number and quality of cells, automatic
current fuse of the motor |
| Programmed parameters
: |
|
| brake |
on / off |
